[ Frisco · Commercial ]
Commercial in Frisco.
Frisco's near-constant new construction — The Star district, Stonebriar Centre and the office and hospitality projects rising along the Tollway and the PGA corridor — means we're measuring commercial glass here almost every week. We coordinate directly with the builders and GCs so our install lines up with the rest of the trades instead of holding up the certificate of occupancy.
[ Frisco · Commercial ]
Because so much Frisco work is ground-up rather than retrofit, the coordination happens early: we take the architect's elevations for storefronts, conference enclosures and hospitality glass, spec the framing, glass thickness and rated assemblies, and lock the install into the builder's finish sequence. Around The Star and the hospitality projects we see a lot of feature storefronts and bar/restaurant counter-top and divider glass, while the office build-outs near Stonebriar and Hall Park run toward frameless and semi-frameless office-front partitions.
Building new in Frisco? Send the storefront and partition elevations and we'll spec the system, return a written quote within 24 hours, and fabricate at our Carrollton shop for delivery on the day your trades are buttoned up. Configurations run framed, semi-frameless and frameless in clear, low-iron or tinted tempered glass, with fire-rated and structurally engineered options where the occupancy, the span or a rated separation requires them.
[ What's included ]
- — Storefronts, conference enclosures, room dividers
- — Climate-rated wine cellar enclosures, fully gasketed and sealed
- — Framed, semi-frameless, frameless configurations
- — Fire-rated and structurally engineered options
- — Direct coordination with GC, architect and millworker
[ Commercial · selected work ]
Recent commercial projects.
[ Frisco · FAQ ]
- Do you coordinate with builders and GCs on Frisco new construction?
- Yes. Most of our Frisco work is ground-up, so we engage at the elevation stage, spec the system, and schedule our install into the builder's finish sequence so the glass goes in alongside the other trades — not after the certificate-of-occupancy deadline.
- Can you quote a Frisco project from the architect's elevations?
- Yes. Send the storefront and partition elevations and we'll spec framing, glass thickness and any rated assemblies, return a written quote within 24 hours, then confirm with a field measurement before fabrication.
- Do you handle hospitality glass around The Star and Stonebriar?
- Yes. We fabricate feature storefronts, bar and counter-top glass, and dividers for the restaurant and hospitality projects in that corridor, in framed, semi-frameless or frameless configurations to match the design intent.
[ Frisco · Begin a project ]
Commercial in Frisco, measured to the millimetre.
Send a sketch, a photo, or just an address. We'll come measure for free in Frisco, propose options and quote a turnkey install — usually within 24 hours.